Suction Mount Kits & Accessories

This CAMERA SUCTION MOUNT is ideal to safely attach a camera on a moving vehicle, aircraft, train or boat. This innovative KIT uses three strong suction cups, six universal joint clamps and a set of three 12 inch and three 18 inch rods that connect in seconds to a camera plate to position a camera or light almost anyplace. A lighting spud and stainless steel safety cable are also included.

The MOUNT weighs just six pounds. ( Total holding force is 200 pounds. (90kg) Maximum camera weight is 50 pounds. (22.5 kg)

The KIT comes in a sturdy metal reinforced travel case that doubles as a camera platform for low angle shots. Inside the case is a large metal base plate the lets you use the MOUNT as a Mini Tripod or Hi-Hat. You can then reverse the rods upward and use the clamps to attach other devices such as a French Flag, Monitor or Eye Light.

With the included foam pads and grips, this multi-purpose KIT can also be configured to serve as a comfortable shoulder mount.

Strong and light weight, this unique SUCTION MOUNT KIT by MICRODOLLY is a valuable and versatile production tool.


Mounting Clamps


The Mounting Clamps has three of our modified Cardellini-style Clamps that work directly with the Suction Mount Kit. The Clamps allow the Camera Plate to be mounted to bars, poles and any square or rounded flat edge surface from 3/8" to 2" thick. Ideal for mounting cameras on bicycles, motorcycles, roof racks, etc. A carrying pouch is included. Each Clamp is 5 3/4" long (14.6cm)

Net Weight: 1 lb. (0.45 kg)

Extension Rod


The Camera Mount Extension Rod Kit contains two 30 inch and two 24 inch rods which can extend the distance of the Suction Mount cups or Mounting Clamps from the Camera Plate. Made of sturdy structural-grade aircraft aluminum the rods are military-spec hard-anodized for long wear. A handy carrying pouch is included.

Net Weight: 1 lb. (0.45 kg)

Riser Kit


Designed to assemble in seconds, the Riser Kit allows you to raise the Jib or camera those extra few inches necessary to accomplish a shot. Kit includes three six inch and three 12 inch legs, two end plates, six mounting screws and a 5" stainless steel threaded rod. A patented MICRODOLLY Speed Nut is also included, along with a screwdriver for quick assembly. A carrying pouch is included.

Size: 5" dia. x 12" (13cm x 30cm) assembled.
Net Weight: 2 lbs. (0.90 kg)

Camera Plate Kit


The Camera Plate Kit includes the Swing Plate, 90 Degree Plate, Undersling, and 100mm Cup. The rugged metal-reinforced hard case includes heavy interior foam padding, pre-cut to accommodate the MICRODOLLY Jib's most popular Camera Plate Accessories. Two metal latches key-lock for added security. Please look below for details and specifications of each accessory.

Size: 20" x 14" x 6" (51cm x 36cm x 15cm)
Net Weight: 14 lbs. (6.35 kg)

Undersling Camera Mount


This clever accessory will allow the camera to be mounted 14 inches below the Jib Boom for shots that require a low angle view. A fluid head may also be mounted between the camera plate and the Undersling so that total pan/tilt control can be maintained. The Undersling can be rotated 360 degrees to face any direction.

Net Weight: 2 lbs. (0.90 kg)

Swing Plate Camera Mount


Designed to extend the Jib camera plate, the Swing Plate Camera Mount can also be rotated 360 degrees to offset the camera at any angle. Machined from structural grade aluminum and hard anodized for weather protection, the Swing Plate is useful to mount a studio matte box or teleprompter. 100mm Cup accessory can also be attached. Plate is 4"x9".

Net Weight: 12 oz. (340 g)

90 Degree Camera Mount


Manufactured from structural grade aluminum and hard anodized for heavy-duty use, the 90 Degree Plate Camera Mount will allow the camera to be mounted vertically from the Jib Camera Plate or the Suction Mount Camera Plate. A 100mm Cup will attach to mount pan/tilt leveling ball. Camera plate knob is included. Face Plate Size: 4"x4".

Net Weight: 1 lb. (0.45 kg)



The Cup Adapter Kit will allow a wide range of Pan/Tilt heads to be mounted to the MICRODOLLY Pro Line of Jibs, Dollies and Mounts. The Kit comes with a 100mm Cup and includes a 75mm and 150mm Cup Insert. It will attach easily to the Hi-Hat, Jib, Standard Tripod or Baby Tripod. It will also attach to any MICRODOLLY Camera Plate Accessory. Made of sturdy structural-grade aircraft aluminum all parts are military-spec hard-anodized for long wear.

Net Weight: 1 lb. (0.45 kg)



Made of sturdy ballistic nylon for long life, these well made Sand Bags travel flat and can be filled on location. The double pockets are vinyl-lined. The Sand Bag loop can be used to hang it on a tripod or light stand. Unlike other bags, these have large soft rubber handles and are designed for comfort. Each bag can hold up to 25 lbs. Sold in sets of three bags.

Net Weight: 1 lb. (0.45 kg)



This is something we believe every crew should have.

These clever tie wraps make it super simple to manage electrical, video, and audio cables. Made from heavy duty rubber bands and attached to a patented flared-end "Bongo" pin, they provide a superior button style closure. "Bongo Ties" are sold in packages of ten.

Net Weight: 2 oz. (57 g)


Same Day Shipping!